Top 20 Greenhouse Manufacturers and Construction Companies in Türkiye

• Research cutoff: 2026-07-18
• Format: Greenhouse structure and construction research · 20-company shortlist
• Coverage: 20 companies
• Headquarters rule: The selected company, contracting entity or traceable public brand is headquartered in Türkiye

What “top” means here

This is not an official ranking, quality award, government endorsement, investment recommendation or procurement decision. Companies are presented alphabetically. “Top” describes a researched shortlist format; it does not place the companies in a best-to-worst performance order.

Quick answer

This revised guide prioritises Türkiye-headquartered greenhouse manufacturers, structural contractors and genuine turnkey integrators. Trading-only candidates and weakly traceable businesses were removed. Four selected companies are based in Central Anatolia—two in Ankara and two in Konya—and two additional inland specialists operate from Sandıklı in Afyonkarahisar, where geothermal greenhouse engineering is directly relevant. The Mediterranean and Marmara clusters remain strongly represented because they contain much of Türkiye’s established greenhouse fabrication, installation and protected-cultivation expertise.

The list is designed around Türkiye’s interests in domestic engineering, industrial fabrication, planned agricultural production, geothermal heat use, efficient water and energy management, regional service capacity and export-ready project delivery. Regional preference does not replace evidence: each company still needs a verifiable role, location and current project or production basis.

Türkiye’s greenhouse priorities and the inland production opportunity

Türkiye’s 2026 Public Investment Program covers 14 organised agricultural-zone projects and plans greenhouse infrastructure over 18,841 decares. Current public programmes also include major geothermal greenhouse initiatives and planned inland projects. These investments create demand not only for steel structures, but also for engineering adapted to snow, wind, seismic loads, heating demand, thermal screening, water treatment, drainage, recirculation, automation and long-term service.

Central Anatolia should not receive copied coastal greenhouse designs. A project in Ankara, Konya, Kayseri, Yozgat or another inland province normally requires explicit cold-climate assumptions, heating-source analysis, snow-load verification, frost protection and realistic winter energy modelling. Geothermal projects additionally require heat-exchanger design, corrosion control, reinjection interfaces and clear responsibility between the greenhouse contractor and geothermal-infrastructure operator.

How this guide was prepared

This independent AgriTech.tr editorial selection is based on publicly verifiable information available through 18 July 2026. The original slug, article title, publication status, category and cover-image metadata were retained.

Eligibility and selection method

• Confirm a Türkiye-headquartered company, contracting entity or traceable public brand.
• Verify current greenhouse-structure manufacturing, construction, engineering or substantive turnkey integration.
• Exclude foreign-headquartered groups selected only because they have a Turkish office, subsidiary, distributor or project.
• Do not treat association membership, a legal-name phrase or a dealer network as proof of manufacturing.
• Separate structural manufacturing, construction, climate engineering, irrigation, automation, hydroponics and project-management roles.
• Give additional weight to Ankara, Konya and inland geothermal capability where the evidence is comparable, without treating geography as proof of quality.
• Prefer recent official, company-published and institutional sources; label company claims and state the evidence boundary.
• Present qualifying companies alphabetically rather than creating a false performance ranking.

Capability map inside the revised shortlist

The 20-company list includes four Central Anatolian companies, two additional inland geothermal-project specialists and a national group of established manufacturers and contractors from the Mediterranean and Marmara regions. The figures below describe this editorial selection, not market share.

A headquarters or contact address does not by itself prove factory capacity. Buyers should identify the contracting entity, production site, engineering office, installation team and after-sales organisation separately.

Alphabetical 20-company shortlist

1. Aytekin Sera Sistemleri A.Ş. — Mersin

Documented role: greenhouse structural components, galvanized profiles, connection equipment, packaged greenhouse systems Türkiye link / status: Türkiye-headquartered greenhouse-equipment manufacturer with production in Mersin Aytekin documents long-running production of greenhouse construction parts, processed pipes, profiles and connection equipment in Mersin. Its range supports both material supply and complete greenhouse projects, making it relevant to large domestic programmes as well as private investments.

Evidence note: The official company profile reports an annual capacity figure for greenhouse components; treat that figure as company-published information and confirm its current scope.

Evidence boundary: Separate factory-made structural products from equipment procured or integrated for a turnkey project. Company or organisation-published source

2. BHK Sera Sistemleri A.Ş. / BHK Greenhouse — Ankara

Documented role: greenhouse steel structures, structural-component manufacturing, turnkey design and installation Türkiye link / status: Türkiye-headquartered greenhouse manufacturer operating an Ankara production facility BHK states that it manufactures greenhouse steel structures, connection materials and other system components at its Ankara facility and provides engineering and turnkey installation. Its inland location is particularly relevant to Central Anatolian projects requiring snow-load, wind-load and heating design rather than coastal-standard replication.

Evidence note: The company publishes a factory-area figure and international project claims; both should be verified in the final technical and commercial review.

Evidence boundary: Require signed, site-specific structural calculations and identify which automation, irrigation and climate packages are manufactured, licensed or procured. Company or organisation-published source

3. Bozkurt Sera — Antalya

Documented role: turnkey greenhouse construction, nursery greenhouses, hydroponic projects, climate and automation integration Türkiye link / status: Türkiye-headquartered greenhouse engineering and installation brand Bozkurt documents current turnkey, nursery and hydroponic greenhouse work from Antalya, including a recent seedling-greenhouse project in Ankara. Its inland references are useful because they indicate experience adapting heating, automation and structure choices to colder production regions.

Evidence note: The public website presents current projects and service scope, but the exact contracting legal entity should be confirmed before procurement.

Evidence boundary: Do not repeat self-promotional leadership claims; verify project completion, design responsibility, subcontractors and warranty ownership. Company or organisation-published source

4. Growith Agro — Ankara

Documented role: modern greenhouse structures, hydroponics, irrigation, automation and digital-agriculture integration Türkiye link / status: Türkiye-headquartered agricultural-technology company reporting production in Ankara Growith presents an Ankara production facility covering greenhouse construction and automation components, together with design, procurement and installation services. The company is relevant to Türkiye’s localisation and digital-agriculture objectives and to inland projects requiring integrated climate, water and data systems.

Evidence note: Factory size, annual installation capacity and domestic-engineering percentages are company-published claims and require documentary verification.

Evidence boundary: Distinguish commercially delivered products from development-stage AI or digital features, and identify third-party technology partners in the offer. Company or organisation-published source

5. İlhan Ayrancı Sera Sistemleri — Konya

Documented role: greenhouse manufacturing and installation, project design, hydroponic and turnkey systems Türkiye link / status: Türkiye-headquartered greenhouse brand operating from Konya İlhan Ayrancı offers greenhouse design, manufacture, material supply and installation from Konya. Its presence adds direct Central Anatolian field capacity to the shortlist and is relevant for smaller and medium-size projects that need local survey, fabrication coordination and after-sales access.

Evidence note: The website describes broad Türkiye and overseas activity, but the registered legal entity, production site and scale of completed projects should be checked.

Evidence boundary: Do not infer industrial-scale factory capacity from the words manufacture or application; request production evidence and comparable references. Company or organisation-published source

6. İMT Sera Otomasyon Elektrik Tar. Ürn. San. ve Tic. Ltd. Şti. — Antalya

Documented role: turnkey plastic and glass greenhouses, greenhouse automation, structural design and climate systems Türkiye link / status: Türkiye-headquartered greenhouse manufacturer and automation integrator İMT documents turnkey modern greenhouse activity under the IMT Greenhouse Automation brand, combining structural design and production with climate and automation systems. It is relevant where a buyer wants one integrator across structure, controls and commissioning.

Evidence note: The company’s history and project descriptions are company-published; current export scale and manufacturing boundaries should be verified.

Evidence boundary: Confirm whether each controller, sensor, heating component and greenhouse profile is made in-house, supplied by a partner or merely installed. Company or organisation-published source

7. Karaca Tarım — Antalya

Documented role: greenhouse automation, irrigation and fertigation, climate systems, greenhouse components and turnkey construction Türkiye link / status: Türkiye-headquartered greenhouse-technology manufacturer and integrator Karaca documents production of irrigation, fertigation, climate-control and greenhouse components in Antalya and offers turnkey greenhouse structures. Its systems role is useful for projects where operational control, water use and nutrient management are as important as the steel structure.

Evidence note: International activity and product breadth are company-published claims; confirm active models, software ownership and project references.

Evidence boundary: Use the public brand together with the exact contracting legal entity, and distinguish company-made controls from third-party components. Company or organisation-published source

8. Konyalılar Metal İnş. Sera Teknolojileri San. ve Tic. A.Ş. — Antalya

Documented role: steel greenhouse construction, heating, cooling, irrigation, fertigation and automation integration Türkiye link / status: Türkiye-headquartered greenhouse manufacturer and turnkey integrator Konyalılar designs and builds greenhouse structures and integrates covering, climate, electrical, irrigation and fertigation systems. Although its present operation is in Antalya, the company’s history connects Konya’s industrial experience with the Mediterranean greenhouse cluster.

Evidence note: Project and production information is company-published and should be checked against current factory and reference records.

Evidence boundary: Require a single responsibility matrix showing which systems Konyalılar designs, manufactures, subcontracts, commissions and warranties. Company or organisation-published source

9. Kozanlar Jeotermal İnşaat Tarım San. Tic. Ltd. Şti. — Sandıklı, Afyonkarahisar

Documented role: geothermal heating infrastructure, heat-interface equipment and turnkey greenhouse installation Türkiye link / status: Türkiye-headquartered geothermal and greenhouse project company with a Sandıklı factory Kozanlar combines geothermal engineering with turnkey greenhouse installation from Sandıklı. This capability is directly relevant to Türkiye’s inland geothermal greenhouse zones, where well characteristics, heat exchangers, distribution networks, corrosion control and reinjection interfaces must be coordinated with greenhouse design.

Evidence note: The company also operates agricultural production; do not treat operation of its own greenhouse as independent proof of contractor performance.

Evidence boundary: Require clear boundaries between geothermal-field works, greenhouse structure, heating network, controls, civil works and long-term maintenance. Company or organisation-published source

10. Kuzey Sera Sistemleri Çelik Konstrüksiyon San. Tic. Ltd. Şti. — Bursa

Documented role: steel greenhouse structures, glass and plastic greenhouse systems, installation Türkiye link / status: Türkiye-headquartered greenhouse manufacturer operating a Bursa factory Kuzey Sera documents production from a Bursa factory and supplies structural systems for several greenhouse applications. Its Marmara location provides a useful manufacturing and logistics bridge between inland investments and the coastal greenhouse supply chain.

Evidence note: The factory-area and experience claims are company-published and should be confirmed during supplier qualification.

Evidence boundary: Verify whether heating, irrigation, automation and hydroponic packages are delivered directly or through named partners. Company or organisation-published source

11. Makma Green House — Sandıklı, Afyonkarahisar

Documented role: turnkey greenhouse construction, civil works, structural assembly, heating, irrigation and fertigation integration Türkiye link / status: Türkiye-based greenhouse construction brand operating from Sandıklı Makma publishes detailed turnkey scope from land grading and foundations through steel construction, heating, irrigation, fertigation, drainage and service buildings. Its Sandıklı base gives it practical relevance to inland and geothermal greenhouse investment corridors.

Evidence note: The site provides extensive technical descriptions but does not clearly establish the contracting legal entity or industrial production capacity.

Evidence boundary: Verify legal identity, engineering signatories, material certificates, structural calculations, completed references and whether equipment is manufactured or procured. Company or organisation-published source

12. Megaton Sera — Konya

Documented role: greenhouse structures, greenhouse equipment, strawberry and vegetable projects, turnkey installation Türkiye link / status: Türkiye-headquartered greenhouse project and equipment brand operating from Konya Megaton offers greenhouse equipment, project design and turnkey installation from Konya, with references covering vegetable and strawberry production. It strengthens the Central Anatolian supplier base for projects that need local access and practical installation experience.

Evidence note: Experience, completed-area and production claims are company-published and should be checked against contracts, factory evidence and customer references.

Evidence boundary: Confirm the legal entity, structural-engineering responsibility, snow-load design and which materials are produced internally. Company or organisation-published source

13. Nefa Sera Teknolojileri Metal Sanayi ve Ticaret — Tarsus, Mersin

Documented role: greenhouse structural systems, installation supervision, hydroponic and turnkey project supply Türkiye link / status: Türkiye-headquartered greenhouse-technology company based in Tarsus Nefa publishes greenhouse model specifications, component catalogues and installation services from Tarsus. Its documented structural range and installation workflow make it suitable for manufacturer and project-supply evaluation.

Evidence note: The precise current legal suffix and production capacity should be confirmed from registry and factory records.

Evidence boundary: Do not assume that every climate, irrigation or hydroponic component in a package is manufactured by Nefa. Company or organisation-published source

14. seraMetal / Hazar Hidrofor San. Tic. Ltd. Şti. — Adana

Documented role: turnkey greenhouse integration, irrigation and fertigation, climate systems and supporting equipment Türkiye link / status: Türkiye-headquartered greenhouse project company operating from Adana seraMetal presents integrated greenhouse work from project design through turnkey installation, including soil and hydroponic production environments, climate control, irrigation and fertigation. Its Adana base gives the shortlist a Çukurova engineering and service presence.

Evidence note: The available evidence supports integrated project delivery more clearly than in-house manufacture of every structural and technical item.

Evidence boundary: Verify factory scope, partner brands, Netherlands-office status, project references and warranty responsibility for each subsystem. Company or organisation-published source

15. Serasan Yapı Teknikleri / Serasan Group — Antalya

Documented role: turnkey glass and plastic greenhouses, structural manufacturing, irrigation and equipment integration Türkiye link / status: Türkiye-headquartered greenhouse construction and project brand Serasan documents greenhouse manufacturing and installation activity in Antalya and offers turnkey glass, plastic, nursery and hydroponic projects. It is a broad-scope candidate where structural works and production systems must be coordinated under one contract.

Evidence note: Capacity, export-country and completed-project figures are company claims and should not be presented as audited market statistics.

Evidence boundary: Confirm the exact legal contracting entity, factory capacity, project dates and responsibility for crop-performance guarantees. Company or organisation-published source

16. Sistem Sera / Ölüdeniz Sistem Sera Tar. İn. Tic. Ltd. Şti. — Seydikemer–Fethiye, Muğla

Documented role: turnkey greenhouse design, galvanized steel construction, climate-data engineering and installation Türkiye link / status: Türkiye-headquartered greenhouse construction company operating from Muğla Sistem Sera documents a current workflow based on regional climate data, structural engineering, land works, fabrication and installation. This climate-led approach is relevant to inland procurement because a greenhouse should be redesigned for local snow, wind and heating conditions rather than copied from a coastal project.

Evidence note: The website identifies the public brand and operating location; verify the full legal title used in the contract.

Evidence boundary: Require calculation files, design standards, fabrication traceability, commissioning records and named designers. Company or organisation-published source

17. Suntek Sanayi ve Ticaret Limited Şirketi / Suntek Sera — Bursa headquarters; Fethiye factory

Documented role: steel greenhouse construction, galvanized profiles, heating equipment and turnkey projects Türkiye link / status: Türkiye-headquartered greenhouse manufacturer with production in Fethiye Suntek documents production of steel greenhouse structures, profiles and heating equipment and provides turnkey projects. Its Bursa management and Fethiye factory create a multi-regional production and service footprint.

Evidence note: The company refers to design criteria including TS EN 13031 on its construction pages; the applicable edition and project-specific compliance must be confirmed.

Evidence boundary: Confirm whether the quoted structural design is independently checked and whether irrigation, fertigation and automation are own products or integrated packages. Company or organisation-published source

18. Teknoser Seracılık A.Ş. — Dilovası, Kocaeli

Documented role: greenhouse structural manufacturing, roll-formed profiles, aluminium systems and project installation Türkiye link / status: Türkiye-headquartered greenhouse manufacturer operating a Kocaeli production facility Teknoser documents an integrated machinery park, roll-forming and aluminium capabilities and a modern enclosed production facility in Kocaeli. Its industrial production profile makes it relevant to projects requiring repeatable component manufacturing and traceability.

Evidence note: Facility and market-position statements are company-published; confirm current production lines, capacity and certifications.

Evidence boundary: Do not treat production of structural components as proof that all climate, irrigation and automation systems are also made in-house. Company or organisation-published source

19. US-KA Mimarlık Mühendislik Hizmetleri Sera Konstrüksiyon Sistemleri — Finike, Antalya

Documented role: greenhouse design, structural manufacturing, turnkey construction, hydroponic and specialised greenhouse projects Türkiye link / status: Türkiye-headquartered greenhouse engineering and construction company US-KA documents design, manufacture and installation work from Finike for vegetable, tropical-fruit, flower, botanical and research greenhouses. Its specialist-project breadth is useful where crop type or institutional use changes the structural and climate requirements.

Evidence note: Company history and project scope are company-published; current export activity and factory capacity require verification.

Evidence boundary: Require dated comparable references and separate architectural, structural, agronomic and automation responsibilities. Company or organisation-published source

20. Varnet Cam Sera Sistemleri Ltd. Şti. — Antalya

Documented role: glasshouse design and engineering, greenhouse installation, climate, water and irrigation integration Türkiye link / status: Türkiye-headquartered glass-greenhouse systems company operating from Antalya OSB Varnet focuses on glasshouse systems and documents design, engineering, installation, climate, water and irrigation activities from Antalya Organized Industrial Zone. It adds a specialist glasshouse option to a list otherwise dominated by plastic and steel-structure providers.

Evidence note: Some public news and fair references are dated; confirm current project activity, ownership, staffing and production status.

Evidence boundary: Verify the origin of aluminium and glass systems, structural design standard, factory scope and warranty interfaces. Company or organisation-published source

Greenhouse and turnkey-project checklist

A credible offer should integrate structural safety, crop climate, water, energy, automation, commissioning and after-sales responsibility—not merely provide a steel-frame price.

1. Define responsibility for feasibility, permits, geotechnical work, foundations, drainage, utilities, structure, covering, climate, irrigation, fertigation, automation, commissioning and agronomic support.
2. Require site-specific structural calculations for wind, snow, seismic conditions, suspended loads, corrosion exposure and the applicable standards.
3. For Central Anatolia, test the winter design temperature, snowfall, thermal-screen strategy, boiler or geothermal capacity, backup heat and annual energy assumptions.
4. For geothermal projects, define the heat exchanger, water chemistry, corrosion protection, reinjection boundary, pumping energy, backup heat and metering responsibility.
5. Review crop and climate assumptions covering temperature, humidity, solar radiation, ventilation, heating, cooling and dehumidification.
6. Review water analysis, storage, filtration, disinfection, nutrient dosing, drainage collection, recirculation and discharge management.
7. Require factory and site acceptance plans, fabrication traceability, coating specifications, bolt and connection schedules, as-built drawings and software access.
8. Visit comparable completed projects and speak directly with operators about winter performance, faults, yield stability, spare parts and service response.
9. Put measurable stage gates, completion criteria, warranty start dates, change-order rules and remedies for delay or non-performance in the contract.
10. Confirm who owns design files, control-system passwords, source data and remote-access rights after handover.

Short request-for-quotation template

Before contacting a company, state the site, crop, cultivated area, structure type, covering, climate targets, water source, energy source, automation level, budget range and delivery window. Ask the offer to separate:

• Contracting legal entity, public brand, factory and manufacturer, contractor or integrator role.
• Structural design basis, loads, standards, materials, coating, foundations and exclusions.
• Heating, cooling, ventilation, screens, irrigation, fertigation, water treatment and automation scope.
• Comparable references in similar climate, crop, altitude and energy conditions.
• Installation, testing, commissioning, training, warranty, service and critical-spares plan.
• For exports: Incoterms, packing, customs, payment security and destination-market conformity.

Corrections and updates

AgriTech.tr invites documented corrections from companies, readers and public bodies. A request should identify the article, disputed statement, proposed correction and a primary or otherwise verifiable source. Confirmed material corrections should receive a dated update note without granting any company editorial veto.

The research cutoff is 18 July 2026. Legal identity, ownership, factory activity, project references and authorisations should be checked again before procurement or republication.

Image rights and AI-assisted cover

Images used with this guide must be original, commissioned or supported by a recorded licence covering the intended editorial use. A public website, company catalogue or government page is not permission by itself to copy an image.

AI-assisted editorial illustration. It does not depict or endorse any company, product, project or public institution listed in this guide.

Official policy and sector sources

• 2026 Public Investment Program, Official Gazette No. 33138, 15 January 2026
• Organised agricultural zones and export objective, 19 June 2026
• Uşak Banaz geothermal greenhouse organised agricultural zone update, 8 July 2026
• Ministry of Agriculture and Forestry 2024–2028 Strategic Plan, updated 11 June 2025
• SERKONDER institutional source
• West Mediterranean Exporters Association